輸入統計品目表（72類）

	Statistical code		Description
	H.S.code		Description

		Tariff rate												Tariff rate (EPA)									Tariff rate	Unit		Law
General	Temporary	WTO	GSP	LDC	Singapore	Mexico	Malaysia	Chile	Thailand	Indonesia	Brunei	ASEAN	Philippines	Switzerland	Viet Nam	India	Peru	Australia	Mongolia	TPP11 (CPTPP)	EU	UK	JP-US Trade Agreement **1	I	II	Law

		I.- PRIMARY MATERIALS; PRODUCTS IN GRANULAR OR POWDER FORM
72.01		Pig iron and spiegeleisen in pigs, blocks or other primary forms
7201.10		Non-alloy pig iron containing by weight 0.5 % or less of phosphorus
	010	- Containing less than 1.2 % by weight of silicon and not more than 0.04 % by weight of phosphorus
		- Other
	091	-- Containing by weight less than 1.6 % of silicon
	099	-- Other
7201.20	000	Non-alloy pig iron containing by weight more than 0.5 % of phosphorus
7201.50	000	Alloy pig iron; spiegeleisen
72.02		Ferro-alloys
		Ferro-manganese
7202.11	000	Containing by weight more than 2 % of carbon
7202.19	000	Other
		Ferro-silicon
7202.21	000	Containing by weight more than 55 % of silicon
7202.29	000	Other
7202.30	000	Ferro-silico-manganese
		Ferro-chromium
7202.41	000	Containing by weight more than 4 % of carbon
7202.49	000	Other
7202.50	000	Ferro-silico-chromium
7202.60		Ferro-nickel
	010	- Containing by weight less than 33 % of nickel
	090	- Other
7202.70	000	Ferro-molybdenum
7202.80		Ferro-tungsten and ferro-silico-tungsten
	010	1 Ferro-tungsten
	020	2 Ferro-silico-tungsten
		Other
7202.91	000	Ferro-titanium and ferro-silico-titanium
7202.92	000	Ferro-vanadium
7202.93	000	Ferro-niobium
7202.99		Other
	010	- Ferro-phosphorus
	090	- Other
72.03		Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94 %, in lumps, pellets or similar forms
7203.10	000	Ferrous products obtained by direct reduction of iron ore
7203.90	000	Other
72.04		Ferrous waste and scrap; remelting scrap ingots of iron or steel
7204.10	000	Waste and scrap of cast iron
		Waste and scrap of alloy steel
7204.21	000	Of stainless steel
7204.29	000	Other
7204.30	000	Waste and scrap of tinned iron or steel
		Other waste and scrap
7204.41	000	Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles
7204.49	000	Other
7204.50		Remelting scrap ingots
	010	1 Of alloy steel
	020	2 Other
72.05		Granules and powders, of pig iron, spiegeleisen, iron or steel
7205.10	000	Granules
		Powders
7205.21		Of alloy steel
	010	- Containing not less than 1% but less than 5 % by weight of nickel
	090	- Other
7205.29	000	Other
		II.- IRON AND NON-ALLOY STEEL
72.06		Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 72.03)
7206.10		Ingots
	010	1 Containing by weight less than 0.6 % of carbon
	020	2 Other
7206.90		Other
	010	1 Containing by weight less than 0.6 % of carbon
	020	2 Other
72.07		Semi-finished products of iron or non-alloy steel
		Containing by weight less than 0.25 % of carbon
7207.11	000	Of rectangular (including square) cross-section, the width measuring less than twice the thickness
7207.12	000	Other, of rectangular (other than square) cross-section
7207.19	000	Other
7207.20		Containing by weight 0.25 % or more of carbon
		1 Containing by weight less than 0.6 % of carbon
	011	- Billets
	012	- Slabs
	019	- Other
	020	2 Other
72.08		Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
7208.10		In coils, not further worked than hot-rolled, with patterns in relief
	010	1 Containing by weight less than 0.6 % of carbon
		2 Other
	021	(1)Of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
	029	(2)Other
		Other, in coils, not further worked than hot-rolled, pickled
7208.25		Of a thickness of 4.75 mm or more
		1 Containing by weight less than 0.6 % of carbon
	011	- Of a thickness of less than 6 mm
	019	- Other
		2 Other
	020	(1)Having a minimum yield point of 355 MPa
	030	(2)Other
7208.26		Of a thickness of 3 mm or more but less than 4.75 mm
		1 Containing by weight less than 0.6 % of carbon
	011	- High tensile steel of a tensile strength of 490 MPa or more
	019	- Other
		2 Other
	021	(1)Having a minimum yield point of 355 MPa
	029	(2)Other
7208.27		Of a thickness of less than 3 mm
		1 Containing by weight less than 0.6 % of carbon
	011	- High tensile steel of a tensile strength of 490 MPa or more
	019	- Other
		2 Other
	021	(1)Having a minimum yield point of 275 MPa
	029	(2)Other
		Other, in coils, not further worked than hot-rolled
7208.36		Of a thickness exceeding 10 mm
	010	1 Containing by weight less than 0.6% of carbon
		2 Other
	021	(1)Having a minimum yield point of 355 MPa
	029	(2)Other
7208.37		Of a thickness of 4.75 mm or more but not exceeding 10 mm
		1 Containing by weight less than 0.6 % of carbon
	011	- Of a thickness of less than 6 mm
	019	- Other
		2 Other
	020	(1)Having a minimum yield point of 355 MPa
	030	(2)Other
7208.38		Of a thickness of 3 mm or more but less than 4.75 mm
	010	1 Containing by weight less than 0.6% of carbon
		2 Other
	021	(1)Having a minimum yield point of 355 MPa
	029	(2)Other
7208.39		Of a thickness of less than 3 mm
	010	1 Containing by weight less than 0.6 % of carbon
		2 Other
	021	(1)Having a minimum yield point of 275 MPa
	029	(2)Other
7208.40		Not in coils, not further worked than hot-rolled, with patterns in relief
	010	1 Containing by weight less than 0.6 % of carbon
		2 Other
	020	(1)Of a thickness of less than of 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
	030	(2)Other
		Other, not in coils, not further worked than hot-rolled
7208.51		Of a thickness exceeding 10 mm
		1 Containing by weight less than 0.6 % of carbon
	011	- Of a thickness of not exceeding 50 mm
	019	- Of a thickness exceeding 50 mm
		2 Other
		(1)Having a minimum yield point of 355 MPa
	021	- Of a thickness of not exceeding 50 mm
	029	- Of a thickness exceeding 50 mm
		(2)Other
	031	- Of a thickness of not exceeding 50 mm
	039	- Of a thickness exceeding 50 mm
7208.52		Of a thickness of 4.75 mm or more but not exceeding 10 mm
		1 Containing by weight less than 0.6 % of carbon
	011	- Of a thickness of less than 6 mm
	019	- Other
		2 Other
		(1)Having a minimum yield point of 355 MPa
	021	- Of a thickness of less than 6 mm
	029	- Other
		(2)Other
	031	- Of a thickness of less than 6 mm
	039	- Other
7208.53		Of a thickness of 3 mm or more but less than 4.75 mm
	010	1 Containing by weight less than 0.6 % of carbon
		2 Other
	021	(1)Having a minimum yield point of 355 MPa
	029	(2)Other
7208.54		Of a thickness of less than 3 mm
	010	1 Containing by weight less than 0.6 % of carbon
		2 Other
	021	(1)Having a minimum yield point of 275 MPa
	029	(2)Other
7208.90	000	Other
72.09		Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated
		In coils, not further worked than cold-rolled (cold-reduced)
7209.15		Of a thickness of 3 mm or more
	010	1 Containing by weight less than 0.6 % of carbon
		2 Other
	021	(1)Having a minimum yield point of 355 MPa
	029	(2)Other
7209.16		Of a thickness exceeding 1mm but less than 3 mm
		1 Containing by weight less than 0.6% of carbon
	011	- High tensile steel of a tensile strength of 340 MPa or more
	019	- Other
		2 Other
	021	(1)Having a minimum yield point of 275 MPa
	029	(2)Other
7209.17		Of a thickness of 0.5 mm or more but not exceeding 1 mm
		1 Containing by weight less than 0.6 % of carbon
	011	- High tensile steel of a tensile strength of 340 MPa or more
	019	- Other
		2 Other
	021	(1)Having a minimum yield point of 275 MPa
	029	(2)Other
7209.18		Of a thickness of less than 0.5 mm
	010	1 Containing by weight less than 0.6 % of carbon
		2 Other
	021	(1)Having a minimum yield point of 275 MPa
	029	(2)Other
		Not in coils, not further worked than cold-rolled (cold-reduced)
7209.25		Of a thickness of 3 mm or more
	010	1 Containing by weight less than 0.6 % of carbon
		2 Other
	021	(1)Having a minimum yield point of 355 MPa
	029	(2)Other
7209.26		Of a thickness exceeding 1mm but less than 3 mm
	010	1 Containing by weight less than 0.6 % of carbon
		2 Other
	021	(1)Having a minimum yield point of 275 MPa
	029	(2)Other
7209.27		Of a thickness of 0.5 mm or more but not exceeding 1 mm
	010	1 Containing by weight less than 0.6 % of carbon
		2 Other
	021	(1)Having a minimum yield point of 275 MPa
	029	(2)Other
7209.28		Of a thickness of less than 0.5 mm
	010	1 Containing by weight less than 0.6 % of carbon
		2 Other
	021	(1)Having a minimum yield point of 275 MPa
	029	(2)Other
7209.90	000	Other
72.10		Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated
		Plated or coated with tin
7210.11	000	Of a thickness of 0.5 mm or more
7210.12	000	Of a thickness of less than 0.5 mm
7210.20	000	Plated or coated with lead, including terne-plate
7210.30		Electrolytically plated or coated with zinc
	010	1 Containing by weight less than 0.6% of carbon
		2 Other
	021	(1)Of steel of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
	029	(2)Other
		Otherwise plated or coated with zinc
7210.41	000	Corrugated
7210.49		Other
	010	- Hot-dip galvannealed, of plated or coated layers undergone a homogeneous alloying process (containing by weight of 7 % or more of iron in the entire layers)
	090	- Other
7210.50		Plated or coated with chromium oxides or with chromium and chromium oxides
	010	- Tinfree steel
	090	- Other
		Plated or coated with aluminium
7210.61	000	Plated or coated with aluminium-zinc alloys
7210.69	000	Other
7210.70	000	Painted, varnished or coated with plastics
7210.90		Other
	010	1 Containing by weight less than 0.6 % of carbon
	020	2 Other
72.11		Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated
		Not further worked than hot-rolled
7211.13		Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
	010	1 Containing by weight less than 0.6 % of carbon
		2 Other
	021	(1)Having a minimum yield point of 355 MPa
	029	(2)Other
7211.14		Other, of a thickness of 4.75 mm or more
	010	1 Containing by weight less than 0.6 % of carbon
		2 Other
	021	(1)Having a minimum yield point of 355 MPa
	029	(2)Other
7211.19		Other
	010	1 Containing by weight less than 0.6 % of carbon
		2 Other
	021	(1)Of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
	029	(2)Other
		Not further worked than cold-rolled (cold-reduced)
7211.23	000	Containing by weight less than 0.25 % of carbon
7211.29		Other
	010	1 Of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
	090	2 Other
7211.90	000	Other
72.12		Flat-rolled products of iron or non-alloy steel, of a width of less than 600mm, clad, plated or coated
7212.10	000	Plated or coated with tin
7212.20		Electrolytically plated or coated with zinc
	010	1 Containing by weight less than 0.6 % of carbon
		2 Other
	021	(1)Of steel of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
	029	(2)Other
7212.30	000	Otherwise plated or coated with zinc
7212.40	000	Painted, varnished or coated with plastics
7212.50		Otherwise plated or coated
	010	- Tinfree steel
	090	- Other
7212.60		Clad
	010	1 Containing by weight less than 0.6 % of carbon
	020	2 Other
72.13		Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel
7213.10	000	Containing indentations, ribs, grooves or other deformations produced during the rolling process
7213.20	000	Other, of free-cutting steel
		Other
7213.91		Of circular cross-section measuring less than 14 mm in diameter
		1 Containing by weight less than 0.6 % of carbon
		- Containing by weight less than 0.25 % of carbon
	011	-- Measuring less than 6 mm in diameter
	019	-- Other
	020	- Other
	090	2 Other
7213.99		Other
	020	1 Containing by weight less than 0.6 % of carbon
	090	2 Other
72.14		Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
7214.10	000	Forged
7214.20	000	Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
7214.30	000	Other, of free-cutting steel
		Other
7214.91		Of rectangular (other than square) cross-section
	020	1 Containing by weight less than 0.6 % of carbon
	090	2 Other
7214.99		Other
	020	1 Containing by weight less than 0.6 % of carbon
	090	2 Other
72.15		Other bars and rods of iron or non-alloy steel
7215.10	000	Of free-cutting steel, not further worked than cold-formed or cold-finished
7215.50		Other, not further worked than cold-formed or cold-finished
		1 Containing by weight less than 0.6 % of carbon
	010	- Containing by weight less than 0.25 % of carbon
	019	- Other
	090	2 Other
7215.90		Other
	010	1 Containing by weight less than 0.6% of carbon
	020	2 Other
72.16		Angles, shapes and sections of iron or non-alloy steel
7216.10	000	U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
		L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
7216.21	000	L sections
7216.22	000	T sections
		U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded of a height of 80 mm or more
7216.31	000	U sections
7216.32	000	I sections
7216.33	000	H sections
7216.40	000	L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
7216.50	000	Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded
		Angles, shapes and sections, not further worked than cold-formed or cold-finished
7216.61	000	Obtained from flat-rolled products
7216.69	000	Other
		Other
7216.91	000	Cold-formed or cold-finished from flat-rolled products
7216.99	000	Other
72.17		Wire of iron or non-alloy steel
7217.10		Not plated or coated, whether or not polished
		1 Containing by weight less than 0.6 % of carbon
	010	- Containing by weight less than 0.25 % of carbon
	019	- Other
	090	2 Other
7217.20		Plated or coated with zinc
		1 Containing by weight less than 0.6 % of carbon
		- Containing by weight less than 0.25 % of carbon
	010	-- Of any cross sectional dimension not exceeding 1.5 mm
	019	-- Other
	090	- Other
	099	2 Other
7217.30		Plated or coated with other base metals
		1 Containing by weight less than 0.6 % of carbon
		- Containing by weight less than 0.25 % of carbon
	011	-- Solid wire for gas sealed arc welding
	019	-- Other
	090	- Other
	099	2 Other
7217.90		Other
		1 Containing by weight less than 0.6 % of carbon
	011	- Containing by weight less than 0.25 % of carbon
	019	- Other
	090	2 Other
		III.- STAINLESS STEEL
72.18		Stainless steel in ingots or other primary forms; semi-finished products of stainless steel
7218.10	000	Ingots and other primary forms
		Other
7218.91	000	Of rectangular (other than square) cross-section
7218.99	000	Other
72.19		Flat-rolled products of stainless steel, of a width of 600 mm or more
		Not further worked than hot-rolled, in coils
7219.11	000	Of a thickness exceeding 10 mm
7219.12		Of a thickness of 4.75 mm or more but not exceeding 10 mm
	011	- Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other elements
		- Of nickel series, containing by weight more than 0.6 % of nickel, whether or not containing other elements :
		-- Containing by weight less than 7 % of nickel
	027	--- Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
	028	--- Other
	029	-- Other
7219.13		Of a thickness of 3 mm or more but less than 4.75 mm
	011	- Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other elements
		- Of nickel series, containing by weight more than 0.6 % of nickel, whether or not containing other elements :
		-- Containing by weight less than 7 % of nickel
	027	---Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
	028	--- Other
	029	-- Other
7219.14	000	Of a thickness of less than 3 mm
		Not further worked than hot-rolled, not in coils
7219.21	000	Of a thickness exceeding 10 mm
7219.22	000	Of a thickness of 4.75 mm or more but not exceeding 10 mm
7219.23	000	Of a thickness of 3 mm or more but less than 4.75 mm
7219.24	000	Of a thickness of less than 3 mm
		Not further worked than cold-rolled (cold-reduced)
7219.31	000	Of a thickness of 4.75 mm or more
7219.32		Of a thickness of 3 mm or more but less than 4.75 mm
	011	- Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other element
		- Of nickel series, containing by weight more than 0.6 % of nickel, whether or not containing other elements
		-- Containing by weight less than 7 % of nickel
	027	--- Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
	028	--- Other
	022	-- Containing by weight 7 % or more but less than 10 % of nickel
	023	--Containing by weight more than 10 % of nickel
7219.33		Of a thickness exceeding 1 mm but less than 3 mm
		- Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other element
	012	-- Containing by weight less than 12 % of chromium
	013	-- Other
		- Of nickel series, containing by weight more than 0.6 % of nickel, whether or not containing other elements
		-- Containing by weight less than 7 % of nickel
	027	--- Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
	028	--- Other
	022	-- Containing by weight 7 % or more but less than 10 % of nickel
	023	-- Containing by weight 10 % or more of nickel
7219.34		Of a thickness of 0.5 mm or more but not exceeding 1 mm
		- Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other element
	012	-- Containing by weight less than 12 % of chromium
	013	-- Other
		- Of nickel series, containing by weight more than 0.6 % of nickel, whether or not containing other elements
		-- Containing by weight less than 7 % of nickel
	027	--- Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
	028	--- Other
	022	-- Containing by weight 7 % or more but less than 10 % of nickel
	023	-- Containing by weight 10 % or more of nickel
7219.35		Of a thickness of less than 0.5 mm
	011	- Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other element
		- Of nickel series, containing by weight more than 0.6 % of nickel, whether or not containing other elements
		-- Containing by weight less than 7 % of nickel
	027	--- Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
	028	--- Other
	022	-- Containing by weight 7 % or more but less than 10 % of nickel
	023	-- Containing by weight 10 % or more of nickel
7219.90	000	Other
72.20		Flat-rolled products of stainless steel, of a width of less than 600 mm
		Not further worked than hot-rolled
7220.11	000	Of a thickness of 4.75 mm or more
7220.12	000	Of a thickness of less than 4.75 mm
7220.20		Not further worked than cold-rolled (cold-reduced)
	011	- Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other element
		- Of nickel series, containing by weight more than 0.6 % of nickel, whether or not containing other elements
		-- Containing by weight less than 7 % of nickel
	027	--- Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
	028	--- Other
	029	-- Other
7220.90	000	Other
72.21
7221.00	000	Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel
72.22		Other bars and rods of stainless steel; angles, shapes and sections of stainless steel
		Bars and rods, not further worked than hot-rolled, hot-drawn or extruded
7222.11	000	Of circular cross-section
7222.19	000	Other
7222.20	000	Bars and rods, not further worked than cold-formed or cold-finished
7222.30	000	Other bars and rods
7222.40	000	Angles, shapes and sections
72.23
7223.00	000	Wire of stainless steel
		IV.- OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON-ALLOY STEEL
72.24		Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel
7224.10		Ingots and other primary forms
	010	1 Of high speed steel
	020	2 Of alloy tool steel, containing by weight not less than 0.5 %, separately or together, of tungsten or molybdenum
	030	3 Other
7224.90		Other
	010	1 Of high speed steel
	020	2 Of alloy tool steel
	030	3 Other
72.25		Flat-rolled products of other alloy steel, of a width of 600 mm or more
		Of silicon-electrical steel
7225.11	000	Grain-oriented
7225.19	000	Other
7225.30		Other, not further worked than hot-rolled, in coils
	100	1 Of alloy tool steel
	200	2 Of high speed steel
		3 Other
	910	- Pickled
	990	- Other
7225.40		Other, not further worked than hot-rolled, not in coils
	100	1 Of alloy tool steel
	200	2 Of high speed steel
		3 Other
	910	- Containing by weight 0.0008% or more of boron, less than basis of other elements listed in Note 1 (f) to this Chapter
	990	- Other
7225.50		Other, not further worked than cold-rolled (cold-reduced)
	100	1 Of alloy tool steel
	200	2 Of high speed steel
	900	3 Other
		Other
7225.91		Electrolytically plated or coated with zinc
	100	1 Bimetal, clad or combined, containing by weight more than 10 % of nickel
	200	2 Of alloy tool steel
	300	3 Of high speed steel
	900	4 Other
7225.92		Otherwise plated or coated with zinc
	100	1 Bimetal, clad or combined, containing by weight more than 10 % of nickel
	200	2 Of alloy tool steel
	300	3 Of high speed steel
	900	4 Other
7225.99		Other
	100	1 Bimetal, clad or combined, containing by weight more than 10 % of nickel
	200	2 Of alloy tool steel
	300	3 Of high speed steel
	900	4 Other
72.26		Flat-rolled products of other alloy steel, of a width of less than 600 mm
		Of silicon-electrical steel
7226.11	000	Grain-oriented
7226.19	000	Other
7226.20	000	Of high speed steel
		Other
7226.91		Not further worked than hot-rolled
	010	1 Of alloy tool steel
	020	2 Other
7226.92		Not further worked than cold-rolled (cold-reduced)
	010	1 Of alloy tool steel
	020	2 Other
7226.99		Other
		1 Bimetal, clad or combined, containing by weight more than 10% of nickel
	110	- Plated or coated with zinc
	190	- Other
	200	2 Of alloy tool steel
	900	3 Other
72.27		Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel
7227.10	000	Of high speed steel
7227.20	000	Of silico-manganese steel
7227.90		Other
	010	1 Of alloy tool steel
		2 Other
	021	- Containing by weight 0.0008% or more of boron, less than basis of other elements listed in Note 1 (f) to this Chapter
	029	- Other
72.28		Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel
7228.10	000	Bars and rods, of high speed steel
7228.20	000	Bars and rods, of silico-manganese steel
7228.30		Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded
	010	1 Of alloy tool steel
	020	2 Other
7228.40		Other bars and rods, not further worked than forged
	010	1 Of alloy tool steel
	020	2 Other
7228.50		Other bars and rods, not further worked than cold-formed or cold-finished
	010	1 Of alloy tool steel
	020	2 Other
7228.60		Other bars and rods
	010	1 Of alloy tool steel
	020	2 Other
7228.70		Angles, shapes and sections
	010	1 Of alloy tool steel
	020	2 Other
7228.80	000	Hollow drill bars and rods
72.29		Wire of other alloy steel
7229.20	000	Of silico-manganese steel
7229.90		Other
	100	1 Of alloy tool steel
	200	2 Of high speed steel
		3 Other
	910	- Solid wire for gas sealed arc welding
	990	- Other

**1The tariff rates in this column are for the tariff lines in the Schedule of Japan, Sub-Section 5, Section B, Annex I of the Agreement.

Free

(Free)

Free

(Free)

Free

(Free)

Free

7.7%

6.3%

Free

2.9%

(Treatment for Australia, Canada and New Zealand) 4% (Treatment for other Parties) Free

Free

7.7%

6.3%

Free

2.9%

Free

(Free)

Free

2.5%

Free

2.5%

Free

0.7%

Free

(Treatment for Australia, Canada and New Zealand) 1.5% (Treatment for other Parties) Free

Free

(5.3%)

Free

7.2%

5.3%

Free

2.5%

Free

5.9%

3.3%

1.98%

Free

(Treatment for Australia, Canada and New Zealand) 2.1% (Treatment for other Parties) Free

Free

2.64%

Free

(Treatment for Australia, Canada and New Zealand) 2.1% (Treatment for other Parties) Free

Free

3.9%

3.3%

Free

(2%)

Free

2.5%

Free

2.5%

Free

2.5%

Free

(Treatment for Australia, Canada and New Zealand) 1.5% (Treatment for other Parties) Free

Free

(2.5%)

Free

2.5%

Free

(Free)

Free

(Free)

Free

(Free)

Free

(Free)

Free

(Free)

Free

(Free)

Free

(Free)

Free

(Free)

Free

5.7%

4.7%

Free

4.1%

3.4%

Free

(Free)

Free

(Free)

Free

(Free)

Free

(Free)

Free

4.6%

Free

(Free)

Free

4.6%

3.9%

Free

(Free)

Free

(Free)

Free

(Free)

Free

(Free)

Free

4.6%

Free

3.9%

Free

4.6%

Free

3.9%

Free

3.9%

Free

4.6%

Free

3.9%

Free

3.9%

Free

4.6%

Free

3.9%

Free

3.9%

Free

4.6%

Free

3.9%

Free

3.9%

Free

4.6%

Free

3.9%

Free

3.9%

Free

4.6%

Free

3.9%

Free

3.9%

Free

4.6%

Free

3.9%

Free

3.9%

Free

4.6%

Free

3.9%

Free

3.9%

Free

4.6%

Free

3.9%

Free

3.9%

Free

4.6%

Free

3.9%

Free

3.9%

Free

4.6%

Free

3.9%

Free

3.9%

Free

4.6%

Free

3.9%

Free

3.9%

Free

4.6%

Free

3.9%

Free

3.9%

Free

3.9%

Free

4.6%

Free

3.9%

Free

3.9%

Free

4.6%

Free

3.9%

Free

3.9%

Free

4.6%

Free

3.9%

Free

3.9%

Free

4.6%

Free

3.9%

Free

3.9%

Free

4.6%

Free

3.9%

Free

3.9%

Free

4.6%

Free

3.9%

Free

3.9%

Free

4.6%

Free

3.9%

Free

3.9%

Free

4.6%

Free

3.9%

Free

3.9%

Free

3.9%

Free

3.9%

Free

3.9%

Free

3.9%

Free

4.6%

Free

3.9%

Free

3.9%

Free

3.9%

Free

3.9%

Free

3.9%

Free

3.9%

Free

3.9%

Free

3.9%

Free

4.6%

Free

3.9%

Free

4.6%

Free

3.9%

Free

3.9%

Free

4.6%

Free

3.9%

Free

3.9%

Free

4.6%

Free

3.9%

Free

3.9%

Free

4.6%

Free

3.9%

Free

3.9%

Free

3.9%

Free

3.9%

Free

4.6%

Free

3.9%

Free

3.9%

Free

3.9%

Free

3.9%

Free

3.9%

Free

4.6%

Free

3.9%

Free

3.9%

Free

3.9%

Free

4.6%

Free

3.9%

Free

4.6%

Free

3.9%

Free

3.9%

Free

3.9%

Free

3.9%

Free

4.6%

Free

3.9%

Free

4.6%

Free

3.9%

Free

3.9%

Free

4.6%

Free

3.9%

Free

4.6%

Free

3.9%

Free

3.9%

Free

3.9%

Free

3.9%

Free

3.9%

Free

3.9%

Free

3.9%

Free

3.9%

Free

3.9%

Free

3.9%

Free

3.9%

Free

3.9%

Free

3.9%

Free

4.6%

Free

3.9%

Free

4.6%

Free

3.9%

Free

4.6%

Free

3.9%

Free

4.6%

Free

4.6%

Free

4.6%

Free

4.6%

Free

4.6%

Free

4.6%

Free

4.6%

Free

4.6%

Free

4.6%

Free

4.6%

Free

4.6%

Free

4.6%

Free

4.6%

Free

4.6%

Free

4.6%

Free

4.6%

SECTION XV BASE METALS AND ARTICLES OF BASE METAL
Chapter 72 Iron and steel.