	Statistical code		Description
	H.S.code		Description

		Tariff rate										Tariff rate (EPA)							Unit
General	Temporary	WTO	GSP	LDC	Singapore	Mexico	Malaysia	Chile	Thailand	Indonesia	Brunei	ASEAN	Philippines	Switzerland	Viet Nam	India	Peru	Australia	I	II

44.01		Fuel wood, in logs, in billets, in twigs, in faggots or in similar forms; wood in chips or particles; sawdust and wood waste and scrap, whether or not agglomerated in logs, briquettes, pellets or similar forms.
4401.10	000	Fuel wood, in logs, in billets, in twigs, in faggots or in similar forms
		Wood in chips or particles
4401.21	000	Coniferous
4401.22	000	Non-coniferous
		Sawdust and wood waste and scrap, whether or not agglomerated in logs, briquettes, pellets or similar forms
4401.31	000	Wood pellets
4401.39	000	Other
44.02		Wood charcoal (including shell or nut charcoal), whether or not agglomerated.
4402.10	000	Of bamboo
4402.90		Other
	010	- Coconut shell charcoal
		- Other
	091	-- Moulded pieces or shapes
	092	-- In powder form or granule form
	099	-- Other
44.03		Wood in the rough, whether or not stripped of bark or sapwood, or roughly squared.
4403.10		Treated with paint, stains, creosote or other preservatives
	100	- Coniferous
		- Non-coniferous
	210	-- Of Kiri (Paulownia spp.)
	220	-- Of Dipterocarpaceae
	230	-- Other
4403.20		Other, coniferous
	100	- Of Pinus spp.
	200	- Of Sitka spruce
	300	- Of genus Abies and genus Picea, excluding sitka spruce
	400	- Of genus Larix
	500	- Of white cedar, yellow cedar and other genus Chamaecyparis
	600	- Of hemlock and other genus Tsuga
	700	- Of red cedar and other genus Thuja
	800	- Of Douglas fir and other genus Pseudotsuga
	900	- Other
		Other, of tropical wood specified in Subheading Note 2 to this Chapter :
4403.41	000	Dark Red Meranti, Light Red Meranti and Meranti Bakau
4403.49		Other
	100	- White Lauan, White Meranti, White Seraya, Yellow Meranti and Alan
		- Keruing, Ramin, Kapur, Teak, Jongkong, Merbau, Jelutong and Kempas
		-- Of Keruing and Kapur
	211	--- Roughly squared or half squared
	219	--- Other
		-- Other
	291	--- Of teak
	292	--- Of ramin
	299	--- Other
	300	- Okoume, Obeche, Sapelli, Sipo, Acajou d'Afrique, Makore and Iroko
	600	- Other
		Other
4403.91	000	Of oak (Quercus spp.)
4403.92	000	Of beech (Fagus spp.)
4403.99		Other
	100	1 Of Kiri (Paulownia spp.), excluding roughly squared or half squared
		2 Other
	910	- Of Kiri (Paulownia spp.)
	920	- Of Dipterocarpaceae
	990	- Other
44.04		Hoopwood; split poles; piles, pickets and stakes of wood, pointed but not sawn lengthwise; wooden sticks, roughly trimmed but not turned, bent or otherwise worked, suitable for the manufacture of walking -sticks, umbrellas, tool handles or the like; chipwood and the like.
4404.10		Coniferous
	100	1 Split poles, piles, pickets and stakes, and hoopwood
	210	2 Wooden sticks
	290	3 Other
4404.20		Non-coniferous
	100	1 Split poles, piles, pickets and stakes, and hoopwood
	210	2 Wooden sticks
	290	3 Other
44.05
4405.00	000	Wood wool; wood flour.
44.06		Railway or tramway sleepers (cross-ties) of wood.
4406.10	000	Not impregnated
4406.90	000	Other
44.07		Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm.
4407.10		Coniferous
		1 Of Pinus spp., Abies spp. (other than California red fir, grand fir, noble fir and pacific silver fir) or Picea spp. (other than Sitka spruce), not more than 160 mm in thickness
	110	(1)Planed or sanded
		(2)Other
	121	A Of Pinus spp.
	129	B Other
		2 Of genus Larix, not more than 160 mm in thickness
	210	(1)Planed or sanded
	290	(2)Other
		3 Other
	310	- Of incense cedar
		- Other
		-- Planed or sanded
	321	--- Of Pinus spp., genus Abies, or genus Picea, more than 160 mm in thickness
	322	--- Of hemlock and other genus Tsuga
	323	--- Of douglas fir and other genus Pseudotsuga
	329	--- Other
		-- Other
	330	--- Of Pinus spp.
		--- Of Sitka spruce
	341	---- Not more than 160 mm in thickness
	349	---- More than 160 mm in thickness
	350	--- Of genus Abies and genus Picea
		--- Of white cedar, yellow cedar and other genus Chamaecyparis
	361	---- Not more than 160 mm in thickness
	369	---- More than 160 mm in thickness
		--- Of hemlock and other genus Tsuga
	371	---- Not more than 160 mm in thickness
	379	---- More than 160 mm in thickness
		--- Of douglas fir and other genus Psudotsuga
	381	---- Not more than 160 mm in thickness
	389	---- More than 160 mm in thickness
		--- Other
	391	---- Not more than 160 mm in thickness
	399	---- More than 160 mm in thickness
		Of tropical wood specified in Subheading Note 2 to this Chapter :
4407.21	000	Mahogany (Swietenia spp.)
4407.22	000	Virola, Imbuia and Balsa
4407.25		Dark Red Meranti, Light Red Meranti and Meranti Bakau
	010	- Planed or sanded
	090	- Other
4407.26		White Lauan, White Meranti, White Seraya, Yellow Meranti and Alan
	010	- Planed or sanded
	090	- Other
4407.27	000	Sapelli
4407.28	000	Iroko
4407.29		Other
		1 Of Dipterocarpaceae
	110	- Planed or sanded
	190	- Other
		2 Other
	215	- Of teak
		- Other
	291	-- Of ramin
	299	-- Other
		Other
4407.91	000	Of oak (Quercus spp.)
4407.92	000	Of beech (Fagus spp.)
4407.93	000	Of maple (Acer spp.)
4407.94	000	Of cherry (Prunus spp.)
4407.95	000	Of ash (Fraxinus spp.)
4407.99		Other
		1 Of Dipterocarpaceae
	310	- Planed or sanded
	390	- Other
		2 Other
	100	- Of Tsuge or boxwood, Tagayasan (Cassia siamea), red sandalwood, rosewood or ebony wood
	200	- Of Kiri(Paulownia spp.)
	400	- Of lignum vitae
	500	- Other
44.08		Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm.
4408.10		Coniferous
	010	1 Of incense cedar (of a length not exceeding 20 cm and of a width not exceeding 8 cm)
		2 Other
		(1)Obtained by slicing laminated wood
	110	A Laminated lumber
	190	B Other
		(2)Other
	210	- Sheets for plywood
	290	- Other
		Of tropical wood specified in Subheading Note 2 to this Chapter
4408.31		Dark Red Meranti, Light Red Meranti and Meranti Bakau
		1 Obtained by slicing laminated wood
	110	(1)Laminated lumber
	190	(2)Other
		2 Other
	210	- Sheets for plywood
	290	- Other
4408.39		Other
		1 Of Padok(kwarin)
		(1)Obtained by slicing laminated wood
	110	A Laminated lumber
	120	B Other
	190	(2)Other
	200	2 Of Jelutong, not more than 20 cm in length and not more than 8 cm in width
		3 Of teak
		(1)Obtained by slicing laminated wood
	510	A Laminated lumber
	520	B Other
	590	(2)Other
		4 Other
		(1)Obtained by slicing laminated wood
	410	A Laminated lumber
	420	B Other
		(2)Other
	910	- Sheets for plywood
	990	- Other
4408.90		Other
		1 Of Tsuge or boxwood, Tagayasan (Cassia siamea), red sandalwood, rosewood or ebony wood
		(1)Obtained by slicing laminated wood
	110	A Laminated lumber
	120	B Other
	190	(2)Other
		2 Other
		(1)Obtained by slicing laminated wood
	510	A Laminated lumber
	520	B Other
		(2)Other
	610	- Sheets for plywood
	690	- Other
44.09		Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, moulded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed.
4409.10		Coniferous :
	100	1 Drawn wood
	200	2 Beadings and mouldings
		3 Other
	310	(1)Of Pinus spp., Abies spp.(other than California red fir, grand fir, noble fir and pacific silver fir), Picea spp.(other than Sitka spruce) and Larix spp., not more than 160 mm in thickness
	320	(2)Other
		Non-coniferous
4409.21		Of bamboo
	100	1 Drawn wood
	200	2 Beadings and mouldings
	900	3 Other
4409.29		Other
	100	1 Drawn wood
	200	2 Beadings and mouldings
		3 Other
	910	(1)Of Dipterocarpaceae
		(2)Other
	991	- Of Kwarin, Tsuge or boxwood, Tagayasan (Cassia siamea), red sandalwood, rosewood or ebony wood
	992	- Of Kiri(Paulownia spp.)
	999	- Other
44.10		Particle board, oriented strand board (OSB) and similar board (for example, waferboard) of wood or other ligneous materials, whether or not agglomerated with resins or other organic binding substances.
		Of wood
4410.11		Particle board
		1 In sheets or in boards
	110	- Unworked or not further worked than sanded
	120	- Surface-covered with melamine-impregnated paper
	190	- Other
	900	2 Other
4410.12		Oriented strand board (OSB)
		1 In sheets or in boards
	110	- Unworked or not further worked than sanded
	190	- Other
	900	2 Other
4410.19		Other
	100	1 In sheets or in boards
	900	2 Other
4410.90		Other
	100	1 In sheets or in boards
	900	2 Other
44.11		Fibreboard of wood or other ligneous materials, whether or not bonded with resins or other organic substances.
		Medium density fibreboard (MDF) :
4411.12		Of a thickness not exceeding 5 mm
	100	1 Of a density exceeding 0.8 g/cm3
	200	2 Of a density not exceeding 0.8 g/cm3
4411.13		Of a thickness exceeding 5 mm but not exceeding 9 mm
	100	1 Of a density exceeding 0.8 g/cm3
	200	2 Of a density not exceeding 0.8 g/cm3
4411.14		Of a thickness exceeding 9 mm
	100	1 Of a density exceeding 0.8 g/cm3
	200	2 Of a density not exceeding 0.8 g/cm3
		Other
4411.92	000	Of a density exceeding 0.8 g/cm3
4411.93	000	Of a density exceeding 0.5 g/cm3 but not exceeding 0.8 g/cm3
4411.94	000	Of a density not exceeding 0.5 g/cm3
44.12		Plywood, veneered panels and similar laminated wood.
4412.10		Of bamboo
		1 Plywood consisting solely of sheets of wood, each ply not exceeding 6 mm thickness
		(1)With at least one outer ply of Dark Red Meranti, Light Red Meranti, White Lauan, Sipo, Limba, Okoume, Obeche, Acajou d'Afrique, Sapelli, Virola, Mahogany (Swietenia spp.), Palissandre de Para, Palissandre de Rio, Palissandre de Rose
		A Varnished, printed, grooved, overlaid or similarly surface-worked
	111	(a)Tangued, grooved or similarly works on one or both sides
	119	(b)Other
		B Other
	191	(a)Less than 6mm in thickness
	199	(b)Other
		(2)Other
		A Varnished, printed, grooved, overlaid or similarly surface-worked
	211	(a) Tangued, grooved or similarly works on one or both sides
	219	(b) Other
		B Other
	291	(a) Less than 6 mm in thickness
	299	(b) Other
		2 Other
	910	(1) Laminated lumber
	990	(2) Other
		Other plywood, consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm thickness :
4412.31		With at least one outer ply of tropical wood specified in Subheading Note 2 to this Chapter
		- With at least one outer ply of Dark Red Meranti, Light Red Meranti, White Lauan, Sipo, Limba, Okoume, Obeche, Acajou d'Afrique, Sapelli, Virola, Mahogany (Swietenia spp.), Palissandre de Para, Palissandre de Rio, Palissandre de Rose
		1 Varnished, printed, grooved, overlaid or similarly surface-worked
	111	(1) Tangued, grooved or similarly works on one or both sides
	191	(2) Other
		2 Other
		(1) Less than 6 mm in thickness
	911	- Less than 3 mm in thickness
	921	- Less than 6 mm but not less than 3 mm in thickness
		(2) Other
	931	- Less than 12 mm but not less than 6 mm in thickness
	941	- Less than 24 mm but not less than 12 mm in thickness
	951	- Not less than 24 mm in thickness
		- Other
		1 Varnished, printed, grooved, overlaid or similarly surface-worked
	119	(1) Tangued, grooved or similarly works on one or both sides
	199	(2) Other
		2 Other
		(1) Less than 6 mm in thickness
	919	- Less than 3 mm in thickness
	929	- Less than 6 mm but not less than 3 mm in thickness
		(2) Other
	939	- Less than 12 mm but not less than 6 mm in thickness
	949	- Less than 24 mm but not less than 12 mm in thickness
	959	- Not less than 24 mm in thickness
4412.32		Other, with at least one outer ply of non-coniferous wood
		1 Varnished, printed, grooved, overlaid or similarly surface-worked
	110	(1) Tangued, grooved or similarly works on one or both sides
	190	(2) Other
		2 Other
		(1) Less than 6 mm in thickness
	911	- Less than 3 mm in thickness
	912	- Less than 6 mm but not less than 3 mm in thickness
		(2) Other
	991	- Less than 12 mm but not less than 6 mm in thickness
	992	- Less than 24 mm but not less than 12 mm in thickness
	993	- Not less than 24 mm in thickness
4412.39		Other
		1 Varnished, printed, grooved, overlaid or similarly surface-worked
	110	(1) Tangued, grooved or similarly works on one or both sides
	190	(2) Other
		2 Other
	910	(1) Less than 6 mm in thickness
		(2) Other
	991	- Less than 12 mm but not less than 6 mm in thickness
	992	- Not less than 12 mm in thickness
		Other
4412.94		Blockboard, laminboard and battenboard
		1 Laminated lumber
	110	- With at least one ply of tropical wood specified in Subheading Note 2 to this Chapter
	190	- Other
	900	2 Other
4412.99		Other
		1 Laminated lumber
	110	- With at least one ply of tropical wood specified in Subheading Note 2 to this Chapter
	120	- Other, with at least one outer ply of non-coniferous wood
	190	- Other
		2 Other
	910	- With at least one ply of tropical wood specified in Subheading Note 2 to this Chapter
	920	- Other, with at least one outer ply of non-coniferous wood
	990	- Other
44.13
4413.00	000	Densified wood, in blocks, plates, strips or profile shapes.
44.14
4414.00	000	Wooden frames for paintings, photographs, mirrors or similar objects.
44.15		Packing cases, boxes, crates, drums and similar packings, of wood; cable-drums of wood; pallets, box pallets and other load boards, of wood; pallet collars of wood.
4415.10	000	Cases, boxes, crates, drums and similar packings; cable -drums
4415.20	000	Pallets, box pallets and other load boards; pallet collars
44.16
4416.00	000	Casks, barrels, vats, tubs and other coopers' products and parts thereof, of wood, including staves.
44.17
4417.00		Tools, tool bodies, tool handles, broom or brush bodies and handles, of wood; boot or shoe lasts and trees, of wood.
	010	1 Boot or shoe lasts and trees
	020	2 Other
44.18		Builders' joinery and carpentry of wood, including cellular wood panels, assembled flooring panels , shingles and shakes.
4418.10	000	Windows, French-windows and their frames
4418.20	000	Doors and their frames and thresholds
4418.40	000	Shuttering for concrete constructional work
4418.50	000	Shingles and shakes
4418.60	000	Posts and beams
		Assembled flooring panels
4418.71	000	For mosaic floors
4418.72	000	Other, multilayer
4418.79	000	Other
4418.90		Other
	100	1 Cellular wood panels
		2 Other
	210	(1) Tategu (door, window sash and the like) and Tokobashira
		(2) Other
	221	- Transom
	223	- Other flooring panels and panels other than assembled flooring panels
		- Other
		-- Structural laminated lumber
	231	--- With a shorter side (width) of cross-section of not less than 15 cm in length and with a cross-sectional area of not less than 300 cm2; of non-rectangular and non-square cross-section
	232	--- With a short side (width) of cross-section of not less than 7.5 cm in length and with a long side (depth) of cross-section of not less than 15 cm in length (other than those of 4418.90-231)
	233	--- Other
	229	-- Other
44.19
4419.00		Tableware and kitchenware, of wood.
		1 Waribashi
	110	- Of bamboo
	190	- Other
	900	2 Other
44.20		Wood marquetry and inlaid wood; caskets and cases for jewellery or cutlery, and similar articles, of wood; statuettes and other ornaments, of wood; wooden articles of furniture not falling in Chapter 94.
4420.10	000	Statuettes and other ornaments, of wood
4420.90		Other
	010	1 Wood marquetry or inlaid wood
	090	2 Other
44.21		Other articles of wood.
4421.10	000	Clothes hangers
4421.90		Other
	100	1 Kushi of bamboo
	200	2 Match splints
		3 Other
	910	(1) Of Kwarin, Tsuge or boxwood, Tagayasan (Cassia siamea) , red sandal wood, rosewood or ebony wood, excluding ebony wood with white streaks
		(2) Other
	920	- Fans and hand screens, nonmechanical; frames and handles thereof and parts of such frames and handles
		- Other
	991	-- Of those obtained by splicing wood sawn lengthwise, whether or not end-jointed
	999	-- Other

Free

(Free)

Free

MT (D.W.)

Free

MT (D.W.)

Free

(Free)

Free

(Free)

Free

(Free)

Free

(Free)

Free

(Free)

Free

(Free)

Free

(Free)

Free

(Free)

Free

(Free)

Free

(Free)

Free

(Free)

Free

(Free)

Free

(Free)

Free

(Free)

Free

(Free)

Free

3.5%

Free

(Free)

Free

(Free)

Free

(Free)

Free

(Free)

Free

(5%)

Free

7.5%

(7.5%)

4.5%

Free

(Free)

Free

(5%)

Free

7.5%

(7.5%)

4.5%

Free

2.5%

(2.5%)

1.5%

Free

(Free)

Free

(Free)

Free

4.8%

2.88%

Free

4.8%

(4.8%)

2.88%

Free

4.8%

2.88%

Free

3.6%

Free

10%

3.6%

Free

(Free)

Free

(Free)

Free

(Free)

Free

10%

Free

3.6%

Free

0.7%

Free

10%

Free

3.6%

Free

0.7%

Free

(Free)

Free

(Free)

Free

10%

Free

3.6%

Free

0.7%

Free

(Free)

Free

(Free)

Free

(Free)

Free

(Free)

Free

(Free)

Free

10%

Free

3.6%

Free

0.7%

Free

(Free)

Free

(Free)

Free

(Free)

Free

(Free)

Free

(Free)

Free

4.8%

15%

Free

0.6%

Free

20%

Free

0.6%

Free

(5%)

Free

0.5%

Free

(5%)

Free

4.8%

15%

Free

0.7%

Free

1.6%

1.0%

Free

1.3%

2.0%

Free

20%

Free

0.7%

Free

1.6%

1.0%

Free

1.3%

2.0%

Free

(5%)

Free

0.5%

Free

1.4%

0.8%

Free

1.1%

1.6%

Free

(5%)

Free

4.8%

15%

Free

0.7%

Free

2.0%

Free

20%

Free

0.7%

Free

2.0%

Free

5.6%

3.36%

Free

(Free)

Free

4.8%

15%

Free

0.7%

Free

1.6%

1.0%

Free

1.3%

2.0%

Free

20%

Free

0.7%

Free

1.6%

1.0%

Free

1.3%

2.0%

Free

(Free)

Free

4.8%

15%

Free

0.7%

Free

1.6%

1.0%

Free

1.3%

2.0%

Free

20%

Free

0.7%

Free

1.6%

1.0%

Free

1.3%

2.0%

Free

(5%)

Free

0.5%

Free

1.4%

0.8%

Free

1.1%

1.6%

Free

(5%)

Free

4.8%

15%

Free

0.7%

Free

1.6%

1.0%

Free

1.3%

2.0%

Free

20%

Free

0.7%

Free

1.6%

1.0%

Free

1.3%

2.0%

Free

5.6%

3.36%

Free

4.8%

15%

Free

0.7%

Free

1.6%

1.0%

Free

1.3%

2.0%

Free

20%

Free

0.7%

Free

1.6%

1.0%

Free

1.3%

2.0%

Free

(5%)

Free

0.5%

Free

1.4%

0.8%

Free

1.1%

1.6%

1.1%

Free

(5%)

Free

7.5%

3.7%

2.22%

Free

4.8%

3.6%

2.16%

Free

(Free)

Free

7.5%

(7.5%)

Free

2.0%

0.8%

Free

2.0%

1.2%

4.2%

1.6%

2.5%

3.1%

Free

4.8%

3.6%

2.16%

Free

2.0%

Free

(Free)

Free

7.5%

3.7%

2.22%

Free

4.8%

3.6%

2.16%

Free

10%

Free

(Free)

Free

(Free)

Free

(Free)

Free

3.6%

Free

0.7%

Free

1.6%

1.0%

Free

0.5%

2.0%

Free

0.7%

Free

1.6%

1.0%

Free

0.5%

2.0%

Free

Other than those surface-covered with decorative laminates of plastics　0.7%

0.7%

Free

1.6%

1.0%

Free

0.5%

2.0%

Free

10%

Free

Other than those surface-covered with decorative laminates of plastics　0.5%

0.5%

Free

1.4%

0.8%

Free

0.4%

1.6%

Free

3.6%

Free

0.7%

Free

1.6%

1.0%

Free

0.5%

2.0%

Free

0.7%

Free

1.6%

1.0%

Free

0.5%

2.0%

Free

10%

Free

Unworked or not further worked than sanded　0.5%

0.5%

Free

1.4%

0.8%

Free

0.4%

1.6%

Free

3.6%

Free

Unworked or not further worked than sanded　0.7% Other(Excluding surface-covered with decorative laminates of plastics and waferboard)　0.7%

0.7%

Free

1.6%

1.0%

Free

0.5%

2.0%

Free

10%

Free

Unworked or not further worked than sanded　0.5% Other(Excluding those surface-covered with decorative laminates of plastics and waferboard)　0.5%

0.5%

Free

1.4%

0.8%

Free

0.4%

1.6%

Free

7.9%

4.74%

Free

0.9%

Free

2.2%

1.3%

Free

0.6%

2.6%

Free

10%

6.6%

3.96%

Free

0.7%

Free

1.8%

1.1%

Free

0.5%

2.2%

Free

5.2%

2.6%

1.56%

Free

0.3%

Free

0.7%

0.4%

Free

0.2%

0.9%

Free

3.5%

2.6%

1.56%

Free

0.3%

Free

0.7%

0.4%

Free

0.2%

0.9%

Free

5.2%

2.6%

1.56%

Free

0.3%

Free

0.7%

0.4%

Free

0.2%

0.9%

Free

3.5%

2.6%

1.56%

Free

0.3%

Free

0.7%

0.4%

Free

0.2%

0.9%

Free

5.2%

2.6%

1.56%

Free

0.3%

Free

0.7%

0.4%

Free

0.2%

0.9%

Free

3.5%

2.6%

1.56%

Free

0.3%

Free

0.7%

0.4%

Free

0.2%

0.9%

Free

5.2%

2.6%

1.56%

Free

0.3%

Free

0.7%

0.4%

Free

0.2%

0.9%

Free

3.5%

2.6%

1.56%

Free

0.3%

Free

0.7%

0.4%

Free

0.2%

0.9%

Free

3.5%

2.6%

1.56%

Free

Fibreboard of a density exceeding 0.35g/cm3　Free

0.3%

Free

0.7%

0.4%

Free

0.2%

0.9%

Free

10%

Free

10.0%

15%

Free

10.0%

15%

10%

Free

10.0%

10%

8.5%

Free

6.0%

8.5%

10%

Free

With at least one outer ply of tropical wood specified in Subheading Note 1 to this Chapter　5.3% Other 6%

6.0%

15%

Free

With at least one outer ply of tropical wood specified in Subheading Note 1 to this Chapter　5.3% Other 6%

6.0%

15%

Free

With at least one outer ply of tropical wood specified in Subheading Note 1 to this Chapter　5.3% Other 6%

6.0%

10%

Free

With at least one outer ply of tropical wood specified in Subheading Note 1 to this Chapter　5.3% Other 6%

6.0%

15%

4.8%

Free

5.3%

Free

3.6%

2.0%

Free

20%

4.8%

Free

Other, with at least one outer ply of non-coniferous wood, or With at least one outer ply of tropical wood specified in Subheading Note 1 to this Chapter　Free

Free

5.3%

Free

3.6%

2.0%

Free

10%

(10%)

Free

10.0%

15%

10%

Free

10.0%

15%

10%

Free

10.0%

10%

8.5%

Free

6.0%

8.5%

6.0%

8.5%

6.0%

8.5%

10%

Free

5.3%

6.0%

15%

Free

5.3%

6.0%

15%

Free

5.3%

6.0%

5.3%

6.0%

10%

Free

5.3%

6.0%

5.3%

6.0%

5.3%

6.0%

10%

Free

6.0%

15%

Free

6.0%

15%

Free

6.0%

10%

Free

6.0%

10%

Free

6.0%

15%

Free

6.0%

15%

Free

6.0%

10%

Free

6.0%

15%

4.8%

Free

5.3%

Free

3.6%

2.0%

Free

5.3%

Free

3.6%

2.0%

Free

20%

4.8%

Free

Other, with at least one outer ply of non-coniferous wood, or With at least one outer ply of tropical wood specified in Subheading Note 1 to this Chapter　Free

Free

5.3%

Free

3.6%

1.4%

Free

15%

4.8%

Free

5.3%

Free

3.6%

2.0%

Free

5.3%

Free

3.6%

Free

5.3%

Free

3.6%

Free

20%

4.8%

Free

5.3%

Free

3.6%

1.4%

Free

5.3%

Free

3.6%

1.4%

Free

5.3%

Free

3.6%

Free

(7%)

4.2%

Free

3.2%

(3.2%)

1.92%

Free

3.4%

2.8%

1.68%

Free

5.8%

3.9%

2.34%

Free

2.6%

2.2%

1.32%

Free

2.6%

2.2%

1.32%

Free

3.4%

2.8%

1.68%

Free

(Free)

Free

(Free)

Free

3.9%

1.2%

Free

5.8%

2.9%

1.74%

Free

3.9%

(3.9%)

2.34%

Free

3.9%

1.2%

Free

3.9%

1.2%

Free

3.9%

1.2%

Free

10%

Free

(Free)

Free

3.9%

Free

1.2%

Free

(3.9%)

2.34%

Free

5.6%

4.7%

2.82%

Free

1.2%

Free

1.5%

Free

1.2%

Free

1.5%

Free

3.2%

2.7%

1.62%

Free

(Free)

Free

20%

10%

Free

1.1%

Free

3.3%

Free

3.2%

2.7%

1.62%

Free

3.9%

2.34%

Free

10%

(10%)

Free

2.6%

1.1%

Free

2.7%

1.6%

5.6%

2.2%

3.3%

4.1%

Free

(Free)

Free

4.6%

3.8%

Free

5.8%

Free

3.9%

2.34%

Free

2.9%

1.74%

Free

SECTION IX WOOD AND ARTICLES OF WOOD; WOOD CHARCOAL; CORK AND ARTICLES OF CORK; MANUFACTURES OF STRAW, OF ESPARTO OR OF OTHER PLAITING MATERIALS; BASKETWARE AND WICKERWORK
Chapter 44 Wood and articles of wood; wood charcoal.