| SECTION XV BASE METALS AND ARTICLES OF BASE METAL | ||||||||||||||
| Chapter 72 Iron and steel. | ||||||||||||||
| Statistical code | Description | Tariff rate | Tariff rate (EPA) | Unit | ||||||||||
| H.S. code | General | Temporary | WTO | GSP | LDC | Singapore | Mexico | Malaysia | Chile | Thailand | I | II | ||
| I.- PRIPARY MATERIALS, PRODUCTS IN GRANULAR OR POWDER FORM | ||||||||||||||
| 72.01 | Pig iron and spiegeleisen in pigs, blocks or other primary forms | Free | Free | Free | Free | Free | ||||||||
| 7201.10 | Non-alloy pig iron containing by weight 0.5% or less of phosphorus | Free | (Free) | |||||||||||
| 010 | - Containing less than 1.2% by weight of silicon and not more than 0.04% by weight of phosphorus | KG | ||||||||||||
| - Other | ||||||||||||||
| 091 | -- Containing by weight less than 1.6% of silicon | KG | ||||||||||||
| 099 | -- Other | KG | ||||||||||||
| 7201.20 | 000 | Non-alloy pig iron containing by weight more than 0.5% of phosphorus | Free | (Free) | KG | |||||||||
| 7201.50 | 000 | Alloy pig iron and, spiegeleisen | Free | (Free) | KG | |||||||||
| 72.02 | Ferro-alloys | Free | Free | Free | Free | Free | ||||||||
| Ferro-manganese | ||||||||||||||
| 7202.11 | 000 | Containing by weight more than 2% of carbon | 7.7% | 6.3% | 5.04% | Free | KG | |||||||
| 7202.19 | 000 | Other | 7.7% | 6.3% | 5.04% | Free | KG | |||||||
| Ferro-silicon | ||||||||||||||
| 7202.21 | 000 | Containing by weight more than 55% of silicon | Free | (Free) | KG | |||||||||
| 7202.29 | 000 | Other | 3% | 2.5% | Free | KG | ||||||||
| 7202.30 | 000 | Ferro-silico-manganse | 3% | 2.5% | 2% | Free | KG | |||||||
| Ferro-chromium | ||||||||||||||
| 7202.41 | 000 | Containing by weight more than 4% of carbon | 7.2% | 5.3% | 3.18% | Free | KG | |||||||
| 7202.49 | 000 | Other | 7.2% | 5.3% | 3.18% | Free | KG | |||||||
| 7202.50 | 000 | Ferro-silico-chromium | 3% | 2.5% | 2% | Free | KG | |||||||
| 7202.60 | Ferro-nickel | 5.9% | 3.3% | |||||||||||
| 010 | - Containing by weight less than 33% of nickel | Free | KG | |||||||||||
| 090 | - Other | Free | KG | |||||||||||
| 7202.70 | 000 | Ferro-molybdenum | 3.9% | 3.3% | 2.64% | Free | KG | |||||||
| 7202.80 | Ferro-tungsten and ferro-silico-tungsten | |||||||||||||
| 010 | 1 Ferro-tungsten | 2% | (2%) | 1.6% | Free | KG | ||||||||
| 020 | 2 Ferrosilico-tungsten | 3% | 2.5% | 2% | Free | KG | ||||||||
| Other | ||||||||||||||
| 7202.91 | 000 | Ferro-titanium and Ferro-silico-titanium | 3% | 2.5% | 2% | Free | KG | |||||||
| 7202.92 | 000 | Ferro-vanadium | 3% | 2.5% | 2% | Free | KG | |||||||
| 7202.93 | 000 | Ferro-niobium | Free | (2.5%) | KG | |||||||||
| 7202.99 | Other | 3% | 2.5% | |||||||||||
| 010 | - Ferro-phosphorus | Free | KG | |||||||||||
| 090 | - Other | 2% | Free | KG | ||||||||||
| 72.03 | Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms, iron having a minimum purity by weight of 99.94%, in lumps, pellets or similar forms | Free | Free | Free | Free | Free | ||||||||
| 7203.10 | 000 | Ferrous products obtained by direct reduction of iron ore | Free | (Free) | KG | |||||||||
| 7203.90 | 000 | Other | Free | (Free) | KG | |||||||||
| 72.04 | Ferrous waste and scrap, remelting scrap ingots of iron or steel | Free | Free | Free | Free | Free | ||||||||
| 7204.10 | 000 | Waste and scrap of cast iron | Free | (Free) | KG | |||||||||
| Waste and scrap of alloy steel | ||||||||||||||
| 7204.21 | 000 | Of stainless steel | Free | (Free) | KG | |||||||||
| 7204.29 | 000 | Other | Free | (Free) | KG | |||||||||
| 7204.30 | 000 | Waste and scrap of tinned iron or steel | Free | (Free) | KG | |||||||||
| Other waste and scrap | ||||||||||||||
| 7204.41 | 000 | Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles | Free | (Free) | KG | |||||||||
| 7204.49 | 000 | Other | Free | (Free) | KG | |||||||||
| 7204.50 | Remelting scrap ingots | |||||||||||||
| 010 | 1 Of alloy steel | 5.7% | 4.7% | Free | KG | |||||||||
| 020 | 2 Other | 4.1% | 3.4% | Free | KG | |||||||||
| 72.05 | Granules and powders, of pig iron, spiegeleisen, iron or steel | Free | Free | Free | Free | Free | ||||||||
| 7205.10 | 000 | Granules | Free | (Free) | KG | |||||||||
| Powders | ||||||||||||||
| 7205.21 | Of alloy steel | Free | (Free) | |||||||||||
| 010 | - Containing not less than 1% but less than 5% by weight of nickel | KG | ||||||||||||
| 090 | - Other | KG | ||||||||||||
| 7205.29 | 000 | Other | Free | (Free) | KG | |||||||||
| II.- IRON AND NON-ALLOY STEEL | ||||||||||||||
| 72.06 | Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 72.03) | Free | Free | Free | Free | Free | ||||||||
| 7206.10 | Ingots | |||||||||||||
| 010 | 1 Containing by weight less than 0.6% of carbon | Free | (Free) | KG | ||||||||||
| 020 | 2 Other | 4.6% | Free | Free | KG | |||||||||
| 7206.90 | Other | |||||||||||||
| 010 | 1 Containing by weight less than 0.6% of carbon | Free | (Free) | KG | ||||||||||
| 020 | 2 Other | 4.6% | 3.9% | Free | KG | |||||||||
| 72.07 | Semi-finished products of iron or non-alloy steel | Free | Free | Free | Free | Free | ||||||||
| Containing by weight less than 0.25% of carbon | ||||||||||||||
| 7207.11 | 000 | Of rectangular (including square) cross-section, the whidth measuring less than twice the thickness | Free | (Free) | KG | |||||||||
| 7207.12 | 000 | Other, of rectangular (other than square) cross-section | Free | (Free) | KG | |||||||||
| 7207.19 | 000 | Other | Free | (Free) | KG | |||||||||
| 7207.20 | Containing by weight 0.25% or more of carbon | |||||||||||||
| 1 Containing by weight less than 0.6% of carbon | Free | (Free) | ||||||||||||
| 011 | - Billets | KG | ||||||||||||
| 012 | - Slabs | KG | ||||||||||||
| 019 | - Other | KG | ||||||||||||
| 020 | 2 Other | 4.6% | Free | Free | KG | |||||||||
| 72.08 | Flat-rolled products of iron or non-alloy steel, of a width of 600mm or more, hot-rolled, not clad, plated or coated | Free | Free | Free | Free | Free | ||||||||
| 7208.10 | In coils, not further worked than hot-rolled, with patterns in relief | |||||||||||||
| 010 | 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | KG | |||||||||
| 2 Other | ||||||||||||||
| 021 | (1)Of a thickness of less than 3mm and having a minimum yield point of 275MPa or of a thickness of 3mm or more and having a minimum yield point of 335 MPa | 4.6% | Free | Free | KG | |||||||||
| 029 | (2)Other | 3.9% | Free | Free | KG | |||||||||
| Other, in coils, not further worked than hot-rolled, pickled | ||||||||||||||
| 7208.25 | Of a thickness of 4.75mm or more | |||||||||||||
| 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | |||||||||||
| 011 | - Of a thickness of less than 6mm | KG | ||||||||||||
| 019 | - Other | KG | ||||||||||||
| 2 Other | ||||||||||||||
| 020 | (1)Having a minimum yield point of 355 MPa | 4.6% | Free | Free | KG | |||||||||
| 030 | (2)Other | 3.9% | Free | Free | KG | |||||||||
| 7208.26 | Of a thickness of 3mm or more but less than 4.75mm | |||||||||||||
| 010 | 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | KG | |||||||||
| 2 Other | ||||||||||||||
| 021 | (1)Having a minimum yield point of 355 MPa | 4.6% | Free | Free | KG | |||||||||
| 029 | (2)Other | 3.9% | Free | Free | KG | |||||||||
| 7208.27 | Of a thickness of less than 3mm | |||||||||||||
| 010 | 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | KG | |||||||||
| 2 Other | ||||||||||||||
| 021 | (1)Having a minimum yield point of 275 MPa | 4.6% | Free | Free | KG | |||||||||
| 029 | (2)Other | 3.9% | Free | Free | KG | |||||||||
| Other, in coils, not further worked than hot-rolled | ||||||||||||||
| 7208.36 | Of a thickness exceeding 10mm | |||||||||||||
| 010 | 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | KG | |||||||||
| 2 Other | ||||||||||||||
| 021 | (1)Having a minimum yield point of 355 MPa | 4.6% | Free | Free | KG | |||||||||
| 029 | (2)Other | 3.9% | Free | Free | KG | |||||||||
| 7208.37 | Of a thickness of 4.75mm or more but not exceeding 10mm | |||||||||||||
| 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | |||||||||||
| 011 | - Of a thickness of less than 6mm | KG | ||||||||||||
| 019 | - Other | KG | ||||||||||||
| 2 Other | ||||||||||||||
| 020 | (1)Having a minimum yield point of 355 MPa | 4.6% | Free | Free | KG | |||||||||
| 030 | (2)Other | 3.9% | Free | Free | KG | |||||||||
| 7208.38 | Of a thickness of 3mm or more but less than 4.75mm | |||||||||||||
| 010 | 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | KG | |||||||||
| 2 Other | ||||||||||||||
| 021 | (1)Having a minimum yield point of 355 MPa | 4.6% | Free | Free | KG | |||||||||
| 029 | (2)Other | 3.9% | Free | Free | KG | |||||||||
| 7208.39 | Of a thickness of less than 3mm | |||||||||||||
| 010 | 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | KG | |||||||||
| 2 Other | ||||||||||||||
| 021 | (1)Having a minimum yield point of 275 MPa | 4.6% | Free | Free | KG | |||||||||
| 029 | (2)Other | 3.9% | Free | Free | KG | |||||||||
| 7208.40 | Not in coils, not further worked than hot-rolled, with patterns in relief | |||||||||||||
| 010 | 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | KG | |||||||||
| 2 Other | ||||||||||||||
| 020 | (1)Of a thickness less than of 3mm and having a minimum yield point of 275 MPa or of a thickness of 3mm or more and having a minimum yield point 355 MPa | 4.6% | Free | Free | KG | |||||||||
| 030 | (2)Other | 3.9% | Free | Free | KG | |||||||||
| Other, not in coils, not further worked than hot-rolled | ||||||||||||||
| 7208.51 | Of a thickness exceeding 10mm | |||||||||||||
| 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | |||||||||||
| 011 | - Of a thickness of not exceeding 50mm | KG | ||||||||||||
| 019 | - Of a thickness exceeding 50mm | KG | ||||||||||||
| 2 Other | ||||||||||||||
| (1)Having a minimum yield point of 355 MPa | 4.6% | Free | Free | |||||||||||
| 021 | - Of a thickness of not exceeding 50mm | KG | ||||||||||||
| 029 | - Of a thickness exceeding 50mm | KG | ||||||||||||
| (2)Other | 3.9% | Free | Free | |||||||||||
| 031 | - Of a thickness of not exceeding | KG | ||||||||||||
| 039 | - Of a thickness exceeding 50mm | KG | ||||||||||||
| 7208.52 | Of a thickness of 4.75mm or more but not exceeding 10mm | |||||||||||||
| 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | |||||||||||
| 011 | - Of a thickness of less than 6mm | KG | ||||||||||||
| 019 | - Other | KG | ||||||||||||
| 2 Other | ||||||||||||||
| (1)Having a minimum yield point of 355 MPa | 4.6% | Free | Free | |||||||||||
| 021 | - Of a thickness of less than 6mm | KG | ||||||||||||
| 029 | - Other | KG | ||||||||||||
| (2)Other | 3.9% | Free | Free | |||||||||||
| 031 | - Of a thickness of less than 6mm | KG | ||||||||||||
| 039 | - Other | KG | ||||||||||||
| 7208.53 | Of a thickness of 3mm or more but less than 4.75mm | |||||||||||||
| 010 | 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | KG | |||||||||
| 2 Other | ||||||||||||||
| 021 | (1)Having a minimum yield point of 355 MPa | 4.6% | Free | Free | KG | |||||||||
| 029 | (2)Other | 3.9% | Free | Free | KG | |||||||||
| 7208.54 | Of a thickness of less than 3mm | |||||||||||||
| 010 | 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | KG | |||||||||
| 2 Other | ||||||||||||||
| 021 | (1)Having a minimum yield point of 275 MPa | 4.6% | Free | Free | KG | |||||||||
| 029 | (2)Other | 3.9% | Free | Free | KG | |||||||||
| 7208.90 | 000 | Other | 3.9% | Free | Free | KG | ||||||||
| 72.09 | Flat-rolled products of iron, or non-alloy steel, of a width of 600mm or more, cold-rolled (cold-reduced), not clad, plated or coated | Free | Free | Free | Free | Free | ||||||||
| In coils, not further worked than cold-rolled (cold-reduced) | ||||||||||||||
| 7209.15 | Of a thickness of 3mm or more | |||||||||||||
| 010 | 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | KG | |||||||||
| 2 Other | ||||||||||||||
| 021 | (1)Having a minimum yield point of 355 MPa | 4.6% | Free | Free | KG | |||||||||
| 029 | (2)Other | 3.9% | Free | Free | KG | |||||||||
| 7209.16 | Of a thickness exceeding 1mm but less than 3mm | |||||||||||||
| 010 | 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | KG | |||||||||
| 2 Other | ||||||||||||||
| 021 | (1)Having a minimum yield point of 275 MPa | 4.6% | Free | Free | KG | |||||||||
| 029 | (2)Other | 3.9% | Free | Free | KG | |||||||||
| 7209.17 | Of a thickness of 0.5mm or more but not exceeding 1mm | |||||||||||||
| 010 | 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | KG | |||||||||
| 2 Other | ||||||||||||||
| 021 | (1)Having a minimum yield point of 275 MPa | 4.6% | Free | Free | KG | |||||||||
| 029 | (2)Other | 3.9% | Free | Free | KG | |||||||||
| 7209.18 | Of a thickness of less than 0.5mm | |||||||||||||
| 010 | 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | KG | |||||||||
| 2 Other | ||||||||||||||
| 021 | (1)Having a minimum yield point of 275 MPa | 4.6% | Free | Free | KG | |||||||||
| 029 | (2)Other | 3.9% | Free | Free | KG | |||||||||
| Not in coils, not further worked than cold-rolled (cold-reduced) | ||||||||||||||
| 7209.25 | Of a thickness of 3mm or more | |||||||||||||
| 010 | 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | KG | |||||||||
| 2 Other | ||||||||||||||
| 021 | (1)Having a minimum yield point of 355 MPa | 4.6% | Free | Free | KG | |||||||||
| 029 | (2)Other | 3.9% | Free | Free | KG | |||||||||
| 7209.26 | Of a thickness of exceeding 1mm but less than 3mm | |||||||||||||
| 010 | 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | KG | |||||||||
| 2 Other | ||||||||||||||
| 021 | (1)Having a minimum yield point of 275 MPa | 4.6% | Free | Free | KG | |||||||||
| 029 | (2)Other | 3.9% | Free | Free | KG | |||||||||
| 7209.27 | Of a thickness of 0.5mm or more but not exceeding 1mm | |||||||||||||
| 010 | 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | KG | |||||||||
| 2 Other | ||||||||||||||
| 021 | (1)Having a minimum yield point of 275 MPa | 4.6% | Free | Free | KG | |||||||||
| 029 | (2)Other | 3.9% | Free | Free | KG | |||||||||
| 7209.28 | Of a thickness of less than 0.5mm | |||||||||||||
| 010 | 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | KG | |||||||||
| 2 Other | ||||||||||||||
| 021 | (1)Having a minimum yield point of 275 MPa | 4.6% | Free | Free | KG | |||||||||
| 029 | (2)Other | 3.9% | Free | Free | KG | |||||||||
| 7209.90 | 000 | Other | 3.9% | Free | Free | KG | ||||||||
| 72.10 | Flat-rolled products of iron, or non-alloy steel, of a width of 600mm or more, clad, plated or coated | Free | Free | Free | Free | Free | ||||||||
| Plated or coated with tin | ||||||||||||||
| 7210.11 | 000 | Of a thickness of 0.5mm or more | 3.9% | Free | Free | KG | ||||||||
| 7210.12 | 000 | Of a thickness of less than 0.5mm | 3.9% | Free | Free | KG | ||||||||
| 7210.20 | 000 | Plated or coated with lead, including terne-plate | 3.9% | Free | Free | KG | ||||||||
| 7210.30 | Electrolytically plated or coated with zinc | |||||||||||||
| 010 | 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | KG | |||||||||
| 2 Other | ||||||||||||||
| 021 | (1)Of steel of a thickness of less than 3mm and having a minimum yield point of 275 MPa or of a thickness of 3mm or more and having a minimum yield point 355 MPa | 4.6% | Free | Free | KG | |||||||||
| 029 | (2)Other | 3.9% | Free | Free | KG | |||||||||
| Otherwise, plated or coated with zinc | ||||||||||||||
| 7210.41 | 000 | Corrugated | 3.9% | Free | Free | KG | ||||||||
| 7210.49 | 000 | Other | 3.9% | Free | Free | KG | ||||||||
| 7210.50 | Plated or coated with chromium oxides or with chromium and chromium oxides | 3.9% | Free | Free | ||||||||||
| 010 | - Tinfree steel | KG | ||||||||||||
| 090 | - Other | KG | ||||||||||||
| Plated or coated with aluminium | ||||||||||||||
| 7210.61 | 000 | Plated or coated with aluminium-zinc base alloys | 3.9% | Free | Free | KG | ||||||||
| 7210.69 | 000 | Other | 3.9% | Free | Free | KG | ||||||||
| 7210.70 | 000 | Painted, varnished or coated with plastics | 3.9% | Free | Free | KG | ||||||||
| 7210.90 | Other | |||||||||||||
| 010 | 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | KG | |||||||||
| 020 | 2 Other | 4.6% | Free | Free | KG | |||||||||
| 72.11 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600mm, not clad, plated or coated | Free | Free | Free | Free | Free | ||||||||
| Not further worked than hot-rolled | ||||||||||||||
| 7211.13 | Rolled on four faces or in a closed box pass, of a width exceeding 150mm and a thickness of not less than 4mm, not in coils and without patterns in relief | |||||||||||||
| 010 | 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | KG | |||||||||
| 2 Other | ||||||||||||||
| 021 | (1)Having a minimum yield point of 355 MPa | 4.6% | Free | Free | KG | |||||||||
| 029 | (2)Other | 3.9% | Free | Free | KG | |||||||||
| 7211.14 | Other, of a thickness of 4.75mm or more | |||||||||||||
| 010 | 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | KG | |||||||||
| 2 Other | ||||||||||||||
| 021 | (1)Having a minimum yield point of 355 MPa | 4.6% | Free | Free | KG | |||||||||
| 029 | (2)Other | 3.9% | Free | Free | KG | |||||||||
| 7211.19 | Other | |||||||||||||
| 010 | 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | KG | |||||||||
| 2 Other | ||||||||||||||
| 021 | (1)Of a thickness of less than of 3mm and having a minimum yield point of 275 MPa or of a thickness of 3mm or more and having a minimum yield point 355 MPa | 4.6% | Free | Free | KG | |||||||||
| 029 | (2)Other | 3.9% | Free | Free | KG | |||||||||
| Not further worked than colod-rolled (cold-reduced) | ||||||||||||||
| 7211.23 | 000 | Containing by weight less than 0.25% of carbon | 3.9% | Free | Free | KG | ||||||||
| 7211.29 | Other | |||||||||||||
| 010 | 1 Of a thickness of less than of 3mm and having a minimum yield point of 275 MPa or of a thickness of 3mm or more and having a minimum yield point 355 MPa | 4.6% | Free | Free | KG | |||||||||
| 090 | 2 Other | 3.9% | Free | Free | KG | |||||||||
| 7211.90 | 000 | Other | 3.9% | Free | Free | KG | ||||||||
| 72.12 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600mm, clad, plated or coated | Free | Free | Free | Free | Free | ||||||||
| 7212.10 | 000 | Plated or coated with tin | 3.9% | Free | Free | KG | ||||||||
| 7212.20 | Electrolytically plated or coated with zinc | |||||||||||||
| 010 | 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | KG | |||||||||
| 2 Other | ||||||||||||||
| 021 | (1)Of steel of a thickness of less than of 3mm and having a minimum yield point of 275 MPa or of a thickness of 3mm or more and having a minimum yield point 355 MPa | 4.6% | Free | Free | KG | |||||||||
| 029 | (2)Other | 3.9% | Free | Free | KG | |||||||||
| 7212.30 | 000 | Otherwise plated or coated with zinc | 3.9% | Free | Free | KG | ||||||||
| 7212.40 | 000 | Painted, varnished or coated with plastics | 3.9% | Free | Free | KG | ||||||||
| 7212.50 | Otherwise plated or coated | 3.9% | Free | Free | ||||||||||
| 010 | - Tinfree steel | KG | ||||||||||||
| 090 | - Other | KG | ||||||||||||
| 7212.60 | Clad | |||||||||||||
| 010 | 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | KG | |||||||||
| 020 | 2 Other | 4.6% | Free | Free | KG | |||||||||
| 72.13 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel | Free | Free | Free | Free | Free | ||||||||
| 7213.10 | 000 | Containing indentations, ribs, grooves or other deformations produced during the rolling process | 3.9% | Free | Free | KG | ||||||||
| 7213.20 | 000 | Other, of free-cutting steel | 3.9% | Free | Free | KG | ||||||||
| Other | ||||||||||||||
| 7213.91 | Of circular cross-section measurings less than 14mm in diameter | |||||||||||||
| 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | |||||||||||
| - Containing by weight less than 0.25% of carbon | ||||||||||||||
| 011 | -- Measuring less than 6mm in diameter | KG | ||||||||||||
| 019 | -- Other | KG | ||||||||||||
| 020 | - Other | KG | ||||||||||||
| 090 | 2 Other | 4.6% | Free | Free | KG | |||||||||
| 7213.99 | Other | |||||||||||||
| 020 | 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | KG | |||||||||
| 090 | 2 Other | 4.6% | Free | Free | KG | |||||||||
| 72.14 | Other bars and rods of iron or non-alloy steel, not further worked than forget, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling | Free | Free | Free | Free | Free | ||||||||
| 7214.10 | 000 | Forged | 3.9% | Free | Free | KG | ||||||||
| 7214.20 | 000 | Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling | 3.9% | Free | Free | KG | ||||||||
| 7214.30 | 000 | Other, of free-cutting steel | 3.9% | Free | Free | KG | ||||||||
| Other | ||||||||||||||
| 7214.91 | Of rectangular (other than square) cross-section | |||||||||||||
| 020 | 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | KG | |||||||||
| 090 | 2 Other | 4.6% | Free | Free | KG | |||||||||
| 7214.99 | Other | |||||||||||||
| 020 | 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | KG | |||||||||
| 090 | 2 Other | 4.6% | Free | Free | KG | |||||||||
| 72.15 | Other bars and rods of iron or non-alloy steel | Free | Free | Free | Free | Free | ||||||||
| 7215.10 | 000 | Of free-cutting steel, not further worked than cold-formed or cold-finished | 3.9% | Free | Free | KG | ||||||||
| 7215.50 | Other, not further worked than cold-formed or cold-finished | |||||||||||||
| 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | |||||||||||
| 010 | - Containing by weight less than 0.25% of carbon | KG | ||||||||||||
| 019 | - Other | KG | ||||||||||||
| 090 | 2 Other | 4.6% | Free | Free | KG | |||||||||
| 7215.90 | Other | |||||||||||||
| 010 | 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | KG | |||||||||
| 020 | 2 Other | 4.6% | Free | Free | KG | |||||||||
| 72.16 | Angles, shapes and sections of iron or non-alloy steel | Free | Free | Free | Free | Free | ||||||||
| 7216.10 | 000 | U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80mm | 3.9% | Free | Free | KG | ||||||||
| L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80mm | ||||||||||||||
| 7216.21 | 000 | L sections | 3.9% | Free | Free | KG | ||||||||
| 7216.22 | 000 | Ｔ sections | 3.9% | Free | Free | KG | ||||||||
| U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80mm or more | ||||||||||||||
| 7216.31 | 000 | Ｕ sections | 3.9% | Free | Free | KG | ||||||||
| 7216.32 | 000 | Ｉ sections | 3.9% | Free | Free | KG | ||||||||
| 7216.33 | 000 | Ｈ sections | 3.9% | Free | Free | KG | ||||||||
| 7216.40 | 000 | L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80mm or more | 3.9% | Free | Free | KG | ||||||||
| 7216.50 | 000 | Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded | 3.9% | Free | Free | KG | ||||||||
| Angles, shapes and sections, not further worked than cold-formed or cold-finished | ||||||||||||||
| 7216.61 | 000 | Obtained from flat-rolled products | 3.9% | Free | Free | KG | ||||||||
| 7216.69 | 000 | Other | 3.9% | Free | Free | KG | ||||||||
| Other | ||||||||||||||
| 7216.91 | 000 | Cold-formed or cold-finished from flat-rolled products | 3.9% | Free | Free | KG | ||||||||
| 7216.99 | 000 | Other | 3.9% | Free | Free | KG | ||||||||
| 72.17 | Wire of iron or non-alloy steel | Free | Free | Free | Free | Free | ||||||||
| 7217.10 | Not plated or coated, whether or not polished | |||||||||||||
| 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | |||||||||||
| 010 | - Containing by weight less than 0.25% of carbon | KG | ||||||||||||
| 019 | - Other | KG | ||||||||||||
| 090 | 2 Other | 4.6% | Free | Free | KG | |||||||||
| 7217.20 | Plated or coated with zinc | |||||||||||||
| 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | |||||||||||
| - Containing by weight less than 0.25% of carbon | ||||||||||||||
| 010 | -- Of any cross sectional dimension not exceeding 1.5mm | KG | ||||||||||||
| 019 | -- Other | KG | ||||||||||||
| 090 | - Other | KG | ||||||||||||
| 099 | 2 Other | 4.6% | Free | Free | KG | |||||||||
| 7217.30 | Plated or coated with other base metal | |||||||||||||
| 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | |||||||||||
| - Containing by weight less than 0.25% of carbon | ||||||||||||||
| 011 | -- Solid wire for gas sealed arc welding | KG | ||||||||||||
| 019 | -- Other | KG | ||||||||||||
| 090 | - Other | KG | ||||||||||||
| 099 | 2 Other | 4.6% | Free | Free | KG | |||||||||
| 7217.90 | Other | |||||||||||||
| 1 Containing by weight less than 0.6% of carbon | 3.9% | Free | Free | |||||||||||
| 011 | - Containing by weight less than 0.25% of carbon | KG | ||||||||||||
| 019 | - Other | KG | ||||||||||||
| 090 | 2 Other | 4.6% | Free | Free | KG | |||||||||
| III.- STAINLESS STEEL | ||||||||||||||
| 72.18 | Stainless steel in ingots or other primary forms, semi-finished products of stainless steel | |||||||||||||